- Vernier Calipers[10]
- Packaging Machinery[10]
- Contact Person : Ms. Chou jessica
- Company Name : Anhui Tianheng Tools Manufacturing Co., Ltd.
- Tel : 86-556-6568566
- Fax : 86-556-6566979
- Address : Anhui,Tongcheng,NO.4 Longchi Road,Economic Development Area
- Country/Region : China
- Zip : 231420
Measuring tools vernier caliper 0 200mm
Measuring tools vernier caliper 0 200mm
Features:
1. measuring range: 0-200mm
2. measuring accuracy: 0.02mm
3. three-way measurements: measuring internal diameter, external diameter, depth.
4. material : carbon steel
5. simple operation and safe.
6.with a fixed scale and slide scale.
How to use a vernier caliper :
An ordinary vernier caliper has jaws you can place around an object, and on the other side jaws made to fit inside an object. These secondary jaws are for measuring the inside diameter of an object. Also, a stiff bar extends from the caliper as you open it that can be used to measure depth.
The basic steps are as follows:1. Preparation to take the measurement, loosen the locking screw and move the slider to check if the vernier scale works properly. Before measuring, do make sure the caliper reads 0 when fully closed. If the reading is not 0, adjust the caliper’s jaws until you get a 0 reading. If you can’t adjust the caliper, you will have to remember to add to subtract the correct offset from your final reading. Clean the measuring surfaces of both vernier caliper and the object, then you can take the measurement.
2. Close the jaws lightly on the item which you want to measure. If you are measuring something round, be sure the axis of the part is perpendicular to the caliper. Namely, make sure you are measuring the full diameter. An ordinary caliper has jaws you can place around an object, and on the other side jaws made to fit inside an object. These secondary jaws are for measuring the inside diameter of an object. Also, a stiff bar extends from the caliper as you open it that can be used to measure depth.
CARE OF CALIPERS:1. Store calipers in separate containers provided.2. Keep graduations and markings on all calipers clean and legible.3. Do not drop any caliper. Small nicks or scratches can cause inaccurate measurements.4. Protect caliper points from damage.
Measuring tools vernier caliper 0 200mm
